Jiangsu Jianda Dry Engineering Co.，Ltd.

Raw materials are spreaded on the conveying belt through suitable auxiliary mechanism such as distributor, vibrating belt, pulverizer of granulator, belt passes the channel which containing one or several heating units; heating unit is equipped with air heater and circle system. Each channel has one or several damp exhaust system. When raw material is transited, hot air passes through or over it. In this way it makes raw material dry uniformly.

Baking kiln is a device for high-temperature heating treatment of powdered or filter cake materials, also known as calcination kiln. According to the different energy sources used, it can be divided into two types: electric heating and natural gas heating furnaces; According to the heating method, it can be divided into two categories: direct heating and indirect heating; According to the operation mode, it can be divided into two forms: continuous operation and indirect write operation. Baking kilns are mainly used for processes such as activation, crystal transformation, oxidation, pyrolysis, reduction, halogenation, and sulfation, and are widely used in the production of special materials in industries such as petrochemicals, inorganic chemicals, metallurgy, and construction.

Liquid material is dried by heat transfer when loading on rotating roller drum surface. Liquid film is spread on rotating roller drum by feeding equipment. Roller drum is heated by heating medium could be steam or transfer oil). Dried liquid film is scraped by scraper. Then dried product is transferred to store tank by screw conveyor. Exhaust air could be directly discharged to atmosphere or after filtration.

The machine is suitable for pharmaceutical,foodstuff, chemical, solid drink and so on industries. It can crush the blocked raw materials into small granule.

This machine is suitable for many industries such as pharmaceutical industry,chemical industry, metallurgy industry, foodstuff industry, scientific research. It can mix powder and granule raw materials having good fluidity and make the mixed raw materials reach the best mixing state.

EYH Series Tow dimensions mixer mainly consists of three big parts,rotating cylinder, swinging rack and frame. The rotating cylinder lies on the swinging rack, supported by four wheels and its axial fixation is done by two stop wheels. Two of the four wheels are driven by rotating system to make the cylinder rotate. The swinging rack is driven by a set of swinglink-crank mechanism which is mounted on the frame and the swinging rack is sup-ported on the frame.

We researched and manufactured Model VI forced stirring mixer on the basis of absorbing abroad high technology.
This machine can mix fine powder,caked or more than two powder raw materials,raw material containing certain moisture.Particularly it can also mix raw material that needs to add small amount of additive and satisfied effect can be got too.

Through the vacuum conveyor of the machine, send the powder or grain state materials into the ldouble-taper container, or send the materials into the container manually. As the container rotates continuously, the materials moves complexly in the container so as to get uniform mixing.

It's energy saving, easy for operation, the labor tensity is low, and the working efficiency is high.

The machine is new type high-efficiency and precise mixer. It' s suitable for mixing the powder state materials in the pharmaceutical, chemical, food, instant soluble and other industries.

The rotation and revolution of machine is finished shrouth a set of motor and cycoidal needle wheel reducer. Being adapted two screws to carry out stirring asymmetrically, it makes the stirring scope of raw material is wide and the mixing is uniform bettr and quickly. Particularly it is suitable for raw materials having large diffrence in specific gravity and large ratio of formulation. All parts canbe contacted with raw material are mdae of stainless steel.

WFJ series fine grinder or CWFJ series super fine grinder consists of thre parts i.e.main machine,auxiliary machine and electric control.lts features are compact in  design,reasonable in structure.lts principle in using air to choose and no sieve or screen.Being instaled grading mechanism inside the machine,the crushing and grading can be finished at the same time.The transportion under negative presure make heat produce from the chamber continously when crushing. Therefore it can also be suitable for crushing thermal sensitive raw materials.The scope of application of machine is wide.lts productive process is continuous and its size of granule can be adjusted.It can crush and grade many raw materials such as chemicals,foodstuff,medicines,cosmetic, dyestuf,resin,shell materials and so on.

This machine adopts the principle of mixing and spraying powder to design and manufacture,It has wide application and is wide used for pharmaceutical industry,foodstuff industry,chemical industry and so on.
The structure of machine is simple.The assembling and disassembling and clean of machine are very convenient.All parts that will contact with raw materials inside the chamber are made of stainless steel. So it withstand acidic coosion. The quality of crushed raw material is in conformity with the requirement of health. This machine has many advantages such as the movement of machine is very convenient and its operation is smooth and its noise id low and its crushed effect is god and its consumption is low.

This machine has wide application and is wide used for pharmaceutical industry chemical industry, pesticide industry, foodstuff industry, orain industry and so on.
This machine uses the relative motion between movable and fixed teeth disc, the raw materials to be crushed under takes the comprehensive actions such as impacted by teeth, friction, impacted between raw materials, finally the raw materials are crushed, its features are simple and solid in structure, stable in operation, highl crushed effciency.The crushed raw material can be discharged through the grinding chamber. Moreaer, different size of raw material to be crushed can be got through exchanging screen with different mesh. Moreover Model 3oB is made from stainless steel. Its inner wall is processed finely,so it is smooth and level. It makes the products of medicines, foodstuff and chemicals and so on are in conformity with the requirements of state standard and meet the requirements of GMP.

The machine consist of hopper, vibrating chamber,connecting shaft,and electricomotor.The vibrating room consist of eccentric wheel,rubber software,main shaft bearing and so on,it may be out of balance and cause eccentricity,and so thant the materials form regular eddy.The amplitude of the weight adhuster may regulate by changing the different material and the meshed of screens.lt is smallin volume,thightness,dutness,noise-free,high output,low in energy consumption,easy to move and easy to maintain. The whole structure of machine is compact,small in volume,no dust,low in noise,low in energy convenient in nowing and maintenance.

It adopts quick disassembling handle at the upper part of this machine. The handle connect the machine as together. Its upper cover is seal fully .Therefore it prevent from the dust flying caused by vibration during the period of sieving .The vibration motor is instaled under the sieve.Meanwhile it adopts spring to reduce vibration. So the machine will operate at stable state,The stand is adjustable,so the inclined angle of sieve can be adjusted in according the raw material.The best sieving effect can be got.

Our company's RLY series oil fuel hot air furnace is a highly efficient equipment which combines burning and heating exchange two functions together. Heating efficiency can reach to 65-75%,the output temperature of hot air can be 30o°C , for special designed furnace, it can reach to 50o-8oo°C,smoke and air are separated,therefore , when heat exchanged , inside of burner is clean hot air; this machine can be totally applied with other drying equipments together.

The air stream containing dust passes through low box from air inlet parts of it deposit whenlight particle dust is floated,it is retarded in the bag.The purified air penetrates the filtrating bag and passes into the up box through Venturi tube and exhausts from outlet.

The accumulated powder dust on the outer wall of filtering bag is increased continuously.If the resistance reaches the limit range (in generally,it should be 80-12OmmH,O),it is necessary to clean the accumulated powder dust.The clean method is as follows:controller touches off each control valve in order.lt makes the compressed air inside the gas bag sprays out through nozzles(the 1st wind).Using Venturitube,several times of air around it(the 2nd wind)enters into the bag and makes the filtering bag expand rapidly at momentary and accompany and with the counter action of air stream.This makes the dust drop into dust gate and discharge outside the machine.

Model SRZ and SRL screw wing radiator manufactured by our company is mainly used for heating air in the system of drying and is main drying equipment in hot air device.The conducted heat medium adopted of radiator may be steam. hot water or heat conducting oil,In general,the working pressure of steam is not more than O.8MPa and the temperature of air will be below 150℃.