Leave Your Message

China PLG Series Continuous Plate Dryer - High-Efficiency Drying Equipment from Leading Suppliers and Factory

Introducing the PLG series continuous plate dryer, a highly efficient drying solution designed for various industries. This innovative equipment features a unique structure and operational principle that ensures high heat efficiency and low energy consumption. The PLG series is compact, requiring less space, and offers simple configuration, easy operation, and excellent environmental conditions. Manufactured in China, our plate dryers are trusted by suppliers in diverse sectors such as chemicals, pharmaceuticals, agricultural chemicals, food processing, feed manufacturing, and the processing of agricultural products and by-products. The PLG series includes three main types: normal pressure, closed, and vacuum styles, with four specifications available (1200, 1500, 2200, and 3000). Choose from three materials for your drying needs: A (carbon steel), B (stainless steel for contact parts), and C (stainless steel enhancements for steam pipes, main shafts, and cylinder linings). With a drying area ranging from 4 to 180 square meters, our factory offers hundreds of models and various auxiliary devices to meet diverse product requirements. Trust our expertise in delivering quality drying solutions that enhance efficiency and performance in your operations.

    Principle

    Wet materials are fed continuously to the top drying layer in the dryer. They will be turned and stirred continuously by harrows when the harrow’s arm rotates, the material flows through the surface of the drying plate along the exponential helical line. On the small drying plate the material will be moved to its exterior edge and drop down to the exterior edge of the large drying plate underneath, and will then be moved inward and drop down from its central hole to the small drying plate on the next layer. Both small and large drying plates are arranged alternately so as materials can go through the whole dryer continuously.

    The heating media, which could be saturated steam, hot water or thermal oil will be led into drying plates from one end to other end of the dryer. The dried product will drop from the last layer of the drying plate to the bottom layer of the body, and will be moved by harrows to the discharge outlet. The moisture exhausts from materials and will be removed from the moist discharge outlet on the top cover, or sucked out by the vacuum pump on the top cover for vacuum-type plate dryer. The dried product discharged from the bottom layer can be packed directly. The drying capability can be raised up if equipped with supplementary devices such as finned heater, condenser for solvent recovery, bag dust filter, return and mix mechanism for dried materials and suction fan etc. solvent in those paste state and heat sensitive materials can be easily recovered, and thermal decomposition and reaction can be also carried out.

    Applications

    Drying, heat decomposition, combustion, cooling, reaction, and sublimation across various sectors:

    Organic chemicals
    Mineral chemicals
    Pharmaceutical and foodstuff
    Feed and fertilizer

    Features

    Easy control, wide application

    Regulate thickness of materials, rotating speed of main shaft, number of rake arm, style and sizes of harrows achieve best drying process.

    Each layer of drying plate can be fed with hot or cold media individually to heat or cold materials and make temperature control accurate and easy.

    Stay time of materials can be accurately adjusted.

    Single flowing direction of materials without return flowing and mixing, uniform drying and stable quality, no re-mixing is required.

    Easy and simple operation

    Start and stop of dryer is quite simple.

    After material feeding is stopped, they can be easily discharged out of the dryer by harrows.

    Careful cleaning and observation can be carried inside the equipment through large-scale viewing window.

    Low energy consumption

    Thin layer of materials, low speed of main shaft, small power and energy required for conveying system of materials.

    Dry by conducting heat so it has high heating efficiency and low energy consumption.

    Good operation environment & solvent recovery

    Normal pressure type: as low speed of air flow inside the equipment and moisture being high in upper part and low in lower part, dust powder could not float to the equipment, so there is almost no dust powder in tail gas discharged from the moist discharge outlet on the top.

    Closed type: equipped with solvent recovery device that can recover organic solvent easily from moist-carrier gas. The solvent recovery device has simple structure and high recovery rate, and nitrogen can be used as moist-carrier gas in closed circulation in order for safe operation. Especially suitable for drying of flammable, explosive and poisonous materials.

    Vacuum type: if the plate dryer is operating under vacuum state, it is particularly suitable for drying heat sensitive materials.

    Easy installation and small occupying area

    As the dryer is in a whole for delivery, it is quite easy to install and fix at site only by hoisting.

    As drying plates being arranged by layers and installed vertically, it takes a small occupying area though drying area is large.

    Technical Parameters

    Model Diameter (mm) High (mm) Area of dry (㎡) Power (kw)
    1200/4 Ø1865 2877 3.3 1.1
    1200/8 3717 6.6 1.5
    1200/10 4137 8.2
    1200/12 4557 9.9 2.2
    1500/6 02166 3327 8.0
    1500/10 4167 13.4
    1500/12 4587 16.1 3.0
    1500/16 5427 21.5
    2200/6 Ø2820 3781 18.5
    2200/12 5041 36.9  
    2200/14 5461 43.1 5.5
    2200/20 6721 61.6  
    2200/22 7141 67.7 11
    2200/26 7981 80.0
    2500/6 Ø3115 3981 26.3 4
    2500/12 5241 52.5 5.5
    2500/14 5661 61.3 7.5
    2500/18 6501 78.8 11
    2500/24 7761 105 15
    3000/8 03768 5143 48 11
    3000/12 6143 72
    3000/18 7643 108 15
    3000/22 8793 132 18.5
    3000/28 10293 168

    Product Display

    Frequently Asked Questions

    Q: What heating media can be utilized in this plate dryer?
    The system supports versatile heating media led directly into the drying plates, including saturated steam, hot water, or thermal oil, depending on your application requirements.
    Q: Can this equipment handle heat-sensitive or flammable materials?
    Yes. Under vacuum operation, it is ideal for heat-sensitive products. For flammable, explosive, or toxic materials, the closed-circuit type utilizes inert gas (such as nitrogen) and a dedicated solvent recovery unit for secure processing.
    Q: How does the dryer prevent back-mixing and ensure uniform quality?
    Materials flow systematically in a single direction along an exponential helical line from top to bottom plates. Since no return flowing occurs, material retention time is precisely regulated, delivering consistent drying without re-mixing.
    Q: Why does the plate dryer feature low energy consumption?
    It relies on continuous conductive heat transfer with high thermal efficiency. Because materials travel in thin layers and the main shaft operates at low speeds, total power required for conveyance is significantly minimized.
    Q: How is the equipment installed and what are the footprint requirements?
    The dryer is delivered as a complete vertical assembly, making site installation straightforward via standard hoisting. Its multi-layer vertical structure offers an expansive drying area while occupying minimal floor space.