China XF Series Fluidization Dryer: Top Suppliers & Factory for Efficient Fluidized-Bed Drying Solutions
Principle
XF fluidization dryer use clean air after filtrating,through heat exchange, make air temperature rise to a certain value into main machine, then through distributor of valve plate into fluidization, material from feder enter into the dryer, because of wind pressure, raw material from boiling state in dryer, the wide contact between hot air and raw material, increasing the process of hot exchang, In short time, make water vaporizing, raw material is discharged from the outlet. exhaust gas discharged from the top of the fluidization bed, and discharged from cyclone separator, dust filter with cloth bag after reclaiming material, The machine is working in negative pressure.
Applications
Used on medicines, chemical raw material, foodstuff, grain processing, feed and so on. For example, raw medicine, granular tablet,chinese trand it ional medicine, health foods, drinks, maize embryo, feed,plastic resin, citric acid and other powders. The suitable diameter of raw material is normally 0.1-0.6mm. The most applicable diameter of raw material will be 0.5-3mm.
Technical Parameters
| Technical Parameters Model | XF0.25-1（XF10） | XF0.25-2（XF20） | XF0.25-3（XF30） | XF0.25-6 | XF0.3-2 | XF0.3-4 | XF0.3-6 | XF0.3-8 | XF0.3-10 | XF0.4-4 | XF0.4-6 |
| Area of bed layer（㎡） | 0.25 | 0.5 | 1.0 | 1.5 | 0.6 | 1.2 | 1.8 | 2.4 | 3.0 | 1.6 | 2.4 |
| Drying capacity（kg H2O／h） | 10~15 | 20~25 | 30~45 | 52~75 | ~30 | 42~60 | 63~90 | 84~120 | 105~150 | 56~80 | 84~120 |
| Power of fan（kw） | 5.5 | 7.5 | 15 | 22 | 7.5 | 18.5 | 30 | 37 | 48 | 30 | 37 |
| Temperature of inlet air（℃） | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 |
| Temperature of raw material（℃） | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 |
| Overall dimensions （main machine） LxWxH （m） | 1x0.6x3.35 | 2x0.6x3.35 | 4x0.6x3.35 | 6x0.6x3.35 | 2x0.70x3.4 | 4x0.70x3.4 | 6x0.70x3.4 | 8x0.70x3.4 | 10x0.70x3.4 | 4x1x3.58 | 6x1x3.58 |
| Occupied area（㎡） | 18 | 25 | 35 | 40 | 25 | 38 | 45 | 56 | 70 | 18 | 56 |
| Technical Parameters Model | XF0.4-8 | XF0.4-10 | XF0.4-12 | XF0.5-4（原XF50） | XF0.5-6 | XF0.5-8 | XF0.5-10 | XF0.5-12 | XF0.5-14 | XF0.5-16 | XF0.5-18 |
| Area of bed layer（㎡） | 3.2 | 4.0 | 4.8 | 2.0 | 3.0 | 4.0 | 5.0 | 6.0 | 7.0 | 8.0 | 9.0 |
| Drying capacity（kg H2O／h） | 112~160 | 140~200 | 168~240 | 70~100 | 105~150 | 140~200 | 175~250 | 210~300 | 245~350 | 280~400 | 315~450 |
| Power of tan（kw） | 48 | 70 | 70 | 30 | 48 | 70 | 105 | 140 | 147 | 169 | 197 |
| Temperature of air in（℃） | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 |
| Temperature of air in（℃） | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 |
| Overall dimensions（main machine）LxWxH（m） | 8x1x3.58 | 10x1x3.58 | 12x1x3.58 | 4x1.2x4.1 | 6x1.2x4.1 | 8x1.2x4.1 | 10x1.2x4.1 | 12x1.2x4.1 | 14x1.2x4.1 | 16x1.2x4.1 | 18x1.2x 4.1 |
| Occupied area（㎡） | 74 | 82 | 96 | 50 | 70 | 82 | 100 | 140 | 180 | 225 | 268 |
Product Display
Frequently Asked Questions
A1: It uses clean, heated air introduced into the main machine via a valve plate distributor. Wind pressure causes the raw materials to enter a boiling (fluidized) state, creating extensive contact between the hot air and the raw material to accelerate heat exchange and vaporize moisture quickly.
A2: The dryer is suitable for processing medicines, chemical raw materials, foodstuff, grains, and feed. Common examples include raw medicine, granular tablets, traditional Chinese medicine, health foods, maize embryo, and plastic resins.
A3: The suitable raw material diameter is typically between 0.1 and 0.6 mm, while the most applicable operating diameter ranges from 0.5 to 3 mm.
A4: The XF fluidization dryer operates under negative pressure to ensure a clean, dust-free, and safe production environment.
A5: Exhaust gas is discharged from the top of the fluidization bed. It then passes through a cyclone separator and a cloth bag dust filter to reclaim any remaining materials before final discharge.
A6: Depending on the specific model, the standard inlet air temperature ranges from 120°C to 140°C, while the temperature of the raw material is maintained between 40°C and 60°C.