High-Quality China SRZ and SRL Screw Wing Radiators from Leading Suppliers and Factory for Air Heating Solutions
Description
The wing radiator consists of three rows of paratactie screw wing pipe mainly,The paratactic screw wing pipe is made through winging O.5x1Omm of steel belt onto 18mm steel pipe and then zine hot galvaniaed ,It can also be made with ful stainless steel pipe and belt.Model SRL radiator is made of steel pipe and aluminum belt through rolling,Its radiator area of the same length is more than Model SRZ.
Being adopted mechanical wound piece,the contacting area between radiating wing piece and radiating pipe is large and its property of heat conducting is good and stable. The resist for air passing is small. The effect of heating or cooling air can be realized through heat condition between wing on steel pipe and air in the gaps of wings.
Technical Parameters
| Item | Stainless steel | Carbonaceous steel | AI |
|---|---|---|---|
| Pipe diameter specification （mm） | Ø18X2 | Ø19X2 | - |
| Diameter of fin （mm） | Ø38 | Ø39 | - |
| Thickness of fin （mm） | 0.24 | - | 0.4 |
| Factor of heat exchanging area（㎡／m） | 0.64 | ||
Product Display
Frequently Asked Questions
What is the construction of the wing radiator?
The wing radiator primarily consists of three rows of paratactic screw wing pipes. These pipes are constructed by winding a 0.5x10mm steel belt onto an 18mm steel pipe, which is then hot-dip galvanized. They can also be manufactured using full stainless steel pipes and belts.
How does the Model SRL radiator compare to the Model SRZ?
The Model SRL radiator is manufactured using a steel pipe and an aluminum belt through a rolling process. For the same length, the Model SRL offers a larger radiator surface area compared to the Model SRZ.
What are the benefits of the mechanical wound piece design?
By adopting a mechanical wound piece design, the contact area between the radiating wing piece and the radiating pipe is maximized. This results in highly efficient and stable heat conductivity while maintaining low resistance to passing air.
What materials are available for the wing radiator pipes and fins?
The radiator components are available in Stainless Steel (with a pipe diameter of Ø18X2 mm and fin diameter of Ø38 mm), Carbonaceous Steel (with a pipe diameter of Ø19X2 mm and fin diameter of Ø39 mm), and Aluminum (used for fins with a thickness of 0.4 mm).
How does the heat exchange process work in this radiator?
Heating or cooling of the air is achieved through thermal conduction between the wings (fins) on the steel pipe and the air flowing through the gaps between those wings.