Leave Your Message

XF SERIES FLUIDIZATION DRYER

Fluidization dryer is also called as fluidized-bed.lt consists of air filter,heater ,fluidized-bed main machine,feeder,cyclone separator,cloth bag duster,high-pressure centrifuge fan and console. Because the property of raw materials is difference,it is necessary to equip dust remover in accordance with practical needs. It can select cyclone separator and cloth bag duster both or one of them. In general, it needs to select cyclone separator only for raw material that is large and cloth bag duster for the material which is powder or small and light granule, meanwhile there pneumatic feeding device and belt conveyor for selection.
Operation of this machine are continuous and intermitter type.
Steam,electricity or hot air furnace can be used (it can be supplied as request).

    Principle

    XF fluidization dryer use clean air after filtrating,through heat exchange, make air temperature rise to a certain value into main machine, then through distributor of valve plate into fluidization, material from feder enter into the dryer, because of wind pressure, raw material from boiling state in dryer, the wide contact between hot air and raw material, increasing the process of hot exchang, In short time, make water vaporizing, raw material is discharged from the outlet. exhaust gas discharged from the top of the fluidization bed, and discharged from cyclone separator, dust filter with cloth bag after reclaiming material,
    The machine is working in negative pressure.

    Applications

    Used on medicines, chemical raw material, foodstuff, grain processing, feed and so on. For example, raw medicine, granular tablet,chinese trand it ional medicine, health foods, drinks, maize embryo, feed,plastic resin, citric acid and other powders. The suitable diameter of raw material is normally 0.1-0.6mm. The most applicable diameter of raw material will be 0.5-3mm.

    Technical Parameters

    Technical Parameters                                  Model XF0.25-1(XF10) XF0.25-2(XF20) XF0.25-3(XF30) XF0.25-6 XF0.3-2 XF0.3-4 XF0.3-6 XF0.3-8 XF0.3-10 XF0.4-4 XF0.4-6
    Area of bed layer(㎡) 0.25 0.5 1.0 1.5 0.6 1.2 1.8 2.4 3.0 1.6 2.4
    Drying capacity(kg H2O/h) 10~15 20~25 30~45 52~75 ~30 42~60 63~90 84~120 105~150 56~80 84~120
    Power of fan(kw) 5.5 7.5 15 22 7.5 18.5 30 37 48 30 37
    Temperature of inlet air(℃) 120~140 120~140 120~140 120~140 120~140 120~140 120~140 120~140 120~140 120~140 120~140
    Temperature of raw material(℃) 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60
    Overall dimensions (main machine) LxWxH (m) 1x0.6x3.35 2x0.6x3.35 4x0.6x3.35 6x0.6x3.35 2x0.70x3.4 4x0.70x3.4 6x0.70x3.4 8x0.70x3.4 10x0.70x3.4 4x1x3.58 6x1x3.58
    Occupied area(㎡) 18 25 35 40 25 38 45 56 70 18 56
                           
    Technical Parameters                                  Model XF0.4-8 XF0.4-10 XF0.4-12 XF0.5-4(原XF50) XF0.5-6 XF0.5-8 XF0.5-10 XF0.5-12 XF0.5-14 XF0.5-16 XF0.5-18
    Area of bed layer(㎡) 3.2 4.0 4.8 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
    Drying capacity(kg H2O/h) 112~160 140~200 168~240 70~100 105~150 140~200 175~250 210~300 245~350 280~400 315~450
    Power of tan(kw) 48 70 70 30 48 70 105 140 147 169 197
    Temperature of air in(℃) 120~140 120~140 120~140 120~140 120~140 120~140 120~140 120~140 120~140 120~140 120~140
    Temperature of air in(℃) 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60
    Overall dimensions(main machine)LxWxH(m) 8x1x3.58 10x1x3.58 12x1x3.58 4x1.2x4.1 6x1.2x4.1 8x1.2x4.1 10x1.2x4.1 12x1.2x4.1 14x1.2x4.1 16x1.2x4.1 18x1.2x 4.1
    Occupied area(㎡) 74 82 96 50 70 82 100 140 180 225 268

    Product Display

    图片22
    图片24