YPG Series Pressure Granulating Spray Dryer - High Efficiency China Suppliers & Factory for Drying and Granulating Solutions
Description
The tower body, pipes, separator of the set where will contact with raw material made of Sus304. There is enough layer of heat preservation between inner and outer of tower body, The filled material is fine glass cotton, The tower body is also equipped with observation door, sight glass, lamp-house and control instruments that is controlled and displayed through electric control panel.
The heat source of the set may be steam or electric heater, its feature are convenient in operation, quick in start, compact structure, clean of hot air and so on. Moreover being installed control and regulating device inside electric control cabinet, the inlet temperature can be controlled through stepless regulation. The steam, coal fuel can be applied to the place where has not electricity. It can replace electric heating locally or fully, The factory can provide different heating method in accordance with the practical condition of customer.
Applications
Foodstuff: Amino acid and similar substances, flavoring, protein, starch, dairy products, extractive from coffee, fish powder, extractive from meat and so on.
Pharmaceutical: Chinese traditional medicines, pesticide, antibiotic, medical drinking and so on.
Ceramics: Magnesium oxide, kaoline, all kind of metallic oxide, dolomite and so on.
Granulating through atomizing: All kinds of fertilizer, aluminium oxide, ceramics powder pharmaceutical, heavy metallic super hardness steel, fertilizer, washing powder, Chinese traditional medicines and so on.
The dryer in the fields of atomizing crystal, concentrate, reaction is used often.
Features
Technical Parameters
| YPG SERIES PRESSURE GRANULATING SPRAY DRYER | |||||||
|---|---|---|---|---|---|---|---|
| Model | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
| Water evaporation capacity (kg/h) | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
| Overall dimension (ΦxH) (mm) | 1200*8900 | 1800*11500 | 2200*13500 | 2400*15400 | 2800*15400 | 3400*18800 | 4600*22500 |
| Power (KW) | 8.5 | 14 | 22 | 24 | 30 | 45 | 75 |
| Inlet air temperature (°C) | 150~350 | ||||||
| Product water contents (%) | Less than 5; and 0.5 can be reached | ||||||
| Material restoration (%) | >97 | ||||||
| Electric heating (KW) | 72 | 120 | 180 | When the temperature is lower than 200°C, the parameters should be calculated | |||
| When the temp. (MPa+KW) | 0.5+54 | 0.6+90 | 0.6+108 | ||||
Product Display

